Mô tả
The LCD2-80 is a backlit LCD annunciator for the NOTIFIER
fire alarm control panels, or network control annunciators that
support the 80-character display format. LCD2-80s may be
connected onto the four-wire EIA-485 terminal port.
The LCD2-80 mimics the display of PTW-3300
PTW-NCA2 and legacy panels that supported the LCD80/LCD-80TM. The NFS2-3030 and the NCA-2 also support
LCD2-80s when set for LCD-80 supervision. Up to 32 LCD2-
80s can annunciate and provide remote reset, acknowledge,
drill and silence of the control panel from remote locations.
Features
• 80-character backlit Liquid Crystal Display (20 characters x
4 lines).
• Display mimics panel or NCA:
– Event message.
– 20 characters for point label.
– 12 characters for extended label.
– Time, date and point address.
• Control switches for System Acknowledge, Signal Silence
Drill and System Reset.
• LEDS for general off-normal events with UL 864 9th Edition
Panels.
NOTE: The LEDs are only applicable when used with UL
864 Ninth Edition listed panels: PTW-3300
PTW-NCA2
• ACS mode option for annunciation of user selected points.
(VeriFire Tools 6.90 or higher required to program points.)
• Up to 6000 foot segments between units.
• Local piezo sounder with alarm/trouble resound.
• Displays all analog, addressable points.
• Displays device type identifiers.
• Displays device and zone custom alpha labels
Đánh giá
Chưa có đánh giá nào.